Which YEN Hardware Should Bengaluru Architects Choose for Different Office Doors?

Use the following as an illustrative shortlist for a proposed project, not as an approved installation schedule:

Proposed door	YEN starting point	Decision before purchase
Glass entrance with floor-mounted closing hardware	Floor Spring and the relevant patch fittings	Confirm the spring model and fittings against the glass layout and door weight
Timber internal door with a visible overhead closer	Trax, Designer Door Closers	Confirm the door against the listed 80 kg capacity and proposed arm arrangement
Toilet cubicle panel requiring spring action	Toilet Cubicle, Spring Hinges	Confirm the hinge size and fixing arrangement for the panel

The value of this shortlist is a focused product discussion. It lets the architect ask about three specific applications while keeping unresolved fitting details visible.

Which YEN products belong in the glass entrance enquiry?

The Floor Spring Accessories range lists three Floor Spring models: 150 kg and 120 kg double-cylinder options, and an 80 kg single-cylinder option. The listing includes double speed adjustment, a heavy-gauge 304SS cover plate and an anti-corrosive black powder-coated box.

Choose the proposed model with the supplier using the actual door details. A glass entrance is not automatically a 150 kg application, and the catalog capacity alone does not establish compatibility with its complete assembly.

Include the glass layout when discussing patch fittings. YEN lists Top Patch, Bottom Patch, Top Pivot and several connectors, so request the particular combination for the drawn opening. Ask the supplier and installer to confirm the glass and floor interfaces before the entrance detail is released.

When is Trax a useful starting point for a timber door?

YEN Trax is listed with an 80 kg capacity, double speed control and a heavy long arm, with Silver and Gold finish options. It is a model to discuss when the office design allows a visible closer body and arm.

For a timber meeting-room or internal office door, provide the door weight, dimensions and frame detail with the enquiry. Ask the installer to confirm the mounting arrangement and space for the arm through the intended movement. Treat the capacity as one selection fact, rather than approval for every door below that weight.

The closer selection also leaves the hinge choice to be resolved. If the door needs separate hinges, discuss those against the door construction instead of assuming that naming Trax completes the hardware set. Browse the Designer Door Closers range for the current model information.

Why give the cubicle its own hardware choice?

YEN's Toilet Cubicle spring hinge is a separate product in the Spring Hinges range. Its listing specifies heavy SS 304 stainless steel, concealed fixing screws and adjustable spring strength, and describes it as specifically designed for humid conditions.

That gives the cubicle discussion a relevant starting point. It does not establish the hinge size or quantity for an unspecified panel. Request confirmation for the actual panel and support detail, and assess the entrance to the washroom separately from its cubicles.

How can Bengaluru architects turn the shortlist into a product enquiry?

Send YEN the proposed door types, available drawings, quantities and intended finishes, with the shortlisted category and model beside each application. Include known door weights and dimensions, and identify any detail that still needs confirmation. Ask for current product options, suitability confirmation and a quotation for the proposed combination.

Start with the Bengaluru door hardware range, or discuss the office requirement with YEN sales on WhatsApp. A glass entrance and timber-door enquiry can then move into a model-specific buying discussion, with the cubicle hardware considered on its own requirements.